In the practical operation process, the slitter can choose from three kinds of job slitting methods, namely round knife slitting, extrusion slitting flat and knife slitting. They reach the slitting intention by different methods, and the applicable information is also available. The difference.
When the slitting machine uses a flat knife for slitting, it is necessary to fix the single-sided blade or the double-sided blade on a fixed knife holder. During the operation of the data, the knife is dropped so that the knife cuts the material longitudinally to reach the slitting intention. But in general, this cutting method is suitable for very thin data.
The circular knife slitting of the slitting machine can be divided into tangential slitting and non-tangential slitting. The former is to divide the data from the tangential direction of the upper and lower disc cutters. This kind of slitting is more convenient. The lower disc cutter can directly adjust the orientation according to the cutting width requirements, and the accuracy is not high, so it is generally not necessary now.
The latter is that the data and the lower disc knife have a certain wrap angle. The lower disc knife falls and cuts the data. This slitting method can make the data not easy to drift, and the slitting accuracy is high. However, it is not very convenient to adjust the knife. When lowering the disc knife device, the entire shaft must be removed.
Extrusion slitting is not common in domestic slitting machines. It is mainly composed of a bottom roller and a pneumatic knife that are synchronized with the speed of the data and have a certain angle with the data. This kind of slitting method can both cut For thin materials, you can also split the comparative data.
https://www.ksslitter.com





