We know that in the process of slitting, the precision requirements for slitting machine equipment are getting higher and higher. If you want to meet the accuracy requirements, you must ensure good slitting quality. What can be called a good cutting quality? In fact, as far as the slitting machine is concerned, it is not a good machine to cut the material completely, but there are excellent cutting results on both the shear surface and the fracture surface.
Such a situation is a good cutting. This cutting quality can not only ensure product accuracy, but also reduce tool wear and extend the service life of the slitting machine. In order to meet this requirement, not only must pay attention to the control of each gap, but also choose a suitable pressure plate at the cutting point. We know that the cutting resistance at the cutting point will cause the material to bend, twist and deform.
Not only that, in this area, avoiding electroplated terminal materials are also more prone to scratches, so you need to choose a suitable pressure plate form. At the same time, considering that the slitting processing of electrical grade materials also needs to further improve the cutting quality, safe production and reduce operating costs. At this time, it is necessary to match a suitable knife holder for the slitting machine equipment. When designing the tool holder, it is generally necessary to simply set the horizontal spacing and overlap amount.
Moreover, during the operation of the slitting machine, it can ensure that the slitting work is stable within the set range. In addition, it is necessary to adjust the horizontal position of the tool shaft accordingly. The horizontal gap can be set digitally on the operation panel, and the lower shaft position can be monitored and adjusted in real time during operation, so that the change in the horizontal gap caused by expansion and other reasons can be reduced to a small amount.
It can be seen from the above introduction that the slitting quality must be strictly controlled during the operation of the slitting machine. Not only must pay attention to reasonable operation, but also the control of its various devices will also affect the cutting quality and the shape of the finished roll. Especially for the drive and control of the tool shaft and the control of the material speed is very important.
https://www.ksslitter.com
