1. Check the weld strength: Grind the back of a turning tool with a green silicon carbide grinding wheel, check the thickness of the solder layer, and the thickness is required to be below 0.15 mm.
2. Check the position of the blade in the knife groove: if the blade of the gantry slitting machine feels misplaced, it should be re-welded.
3. Check the welding strength: Use a wooden hammer or a copper hammer to strike the blade with medium force, and it is qualified if the blade does not fall off from the groove.
4. Check the flatness of the blade: if there is a pit on the blade of the gantry slitting machine, it means that the blade is overheated and deformed, and a new blade should be burned and re-welded.
5. Check for cracks: After the blade is cleaned with kerosene, if the blade has cracks. Kerosene penetrates into the cracks and black lines appear, which can be observed with the naked eye.
