1. Check the thickness of the brake friction plate of the slitting machine. When the wear is severe, it needs to be replaced
2. Check whether the linear guide of the slitting machine is clean, and clean them if necessary
3. Check whether the drive belt of the slitter is maintained at its due tension
4. Check if there is any air leakage in the air path of the slitting machine, if the air filter is clean, and clean the filter element at least once a month
5. Check the surface of all rubber rollers of the slitting machine, do not contact with the slitting tool, so as not to damage the surface. Remember to use 1 liter of cleaning fluid per week (usually warm water and low surface tension soap or solvent) and lightly wipe the roller with a lint-free scrubbing cloth
6. Check the filter of the suction fan of the slitting machine. If there is too much dirt and it is not clean, replace it in time
7. When the roller is dirty, you can wipe it with a fine gauze cloth dipped in industrial alcohol, but be careful not to wipe some parts of the slitting machine with alcohol, so as not to cause rust.
https://www.ksslitter.com
