Sep 29, 2022 Leave a message

How to operate the slitting machine?

The operating speed of the slitting machine can reach more than 300 meters per minute. Before using the equipment, we must check the machine carefully to see if the parts are damaged. So everyone knows how to operate the slitting machine?

1. When turning on the power, first check whether the static elimination mode has been turned on. This is to prevent the machine from malfunctioning and causing unnecessary losses during operation.

2. Turn on the air supply switch of the slitter and adjust it to between 0.5 and 0.6. Air pressure adjustment is critical as it affects the stability of the operation. After adjustment, use three to six cones to place the parent roll into the roll section.

3. After the mother roll is put into the roll section, it is necessary to debug the machine, compare the diameter of the mother roll, press the up or down button, adjust the feeding rack to a suitable height, and then clamp the roll film, so that it can rotate at a uniform or fast speed,

4. Press the height adjustment button to confirm the safety. Next, to install the blade, first check the blade edge of the blade to see if there is any damage, and then select the appropriate cutting method according to the needs.

When all of us operate and use the slitting machine, we can all operate and use the slitting machine according to the above operation methods, and the correct operation and use of the slitting machine is what we all need to do.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry