Flat cutter slitting is mainly suitable for slitting very thin plastic film and composite film.
Round knife slitting
Round knife slitting can be divided into tangential slitting and non-tangential slitting.
Tangential slitting means that the material is cut from the tangential direction of the upper and lower disc knives. This kind of slitting is more convenient for knife alignment. The upper disc knife and the lower disc knife can be easily adjusted directly according to the cutting width requirements. Its disadvantage is that the material is easy to drift at the cutting place, so the accuracy is not high, and it is generally not used now.
Non-tangential slitting means that the material and the lower disc knife have a certain wrap angle, and the lower disc knife falls to cut the material. This cutting method can make the material not easy to drift, and the cutting precision is high. But it is not very convenient to adjust the knife. When installing the lower disc knife, the whole shaft must be removed. Round knife slitting is suitable for slitting thicker composite films and papers.
May 20, 2023
Leave a message
Introduction of flat knife cutting method of slitting machine
Send Inquiry





