1. The paper slitting machine needs to perform fixed-length slitting processing on the whole roll or the entire raw material, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., which must be controlled by fixed-length slitting.
2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
3. The slitting control of the paper slitting machine is divided into static and dynamic slitting: when the set length is reached, it will stop accurately, then statically slit, and restart the operation after slitting; when the set length is reached, it will not stop and send out Slitting signal, the slitting machine performs dynamic slitting processing during the material movement.
The advantage of the paper tube slitting machine is that the main shaft for processing the paper tube is installed in the middle of the paper tube slitting machine. The front end of the main shaft is fixed on the base with a set of bearings, and a pulley is installed in the middle of a set of bearings; A compression cylinder is installed at the position, and a set of support rod bearings is installed on the upper end of the support rod of the cylinder to support the main shaft.
A main cutter shaft is installed on the upper end of the paper tube slitting machine, and several blades are arranged on it, and they are arranged according to a certain gap; the support frame of the main cutter shaft is also set at the top of the paper tube slitting machine. A support cylinder is installed in the middle.
The structural advantages of the paper tube slitting machine fill the technical gap of the automatic tube cutting machine.
