Before use, the main components of the automatic slitting machine should be inspected and lubricated; when inspecting and disassembling the automatic slitting machine, it is strictly forbidden to use inappropriate tools and unscientific operation methods; check the machine every two weeks. Make a comprehensive cleaning and inspection; if the automatic slitting machine is not used for a long time, all bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine. If the automatic slitting machine is out of use for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, carefully clean the equipment, wipe the exposed friction surface clean, and add lubricating oil. daily maintenance
To do a good job in the daily maintenance and maintenance of the slitting machine, you must do the following five points.
First, the electrical parts should be cleaned and inspected regularly to eliminate hidden dangers in time.
Second, the use of the slitting machine is completed by the slitting machine and the cross cutting machine, so high-quality slitting knives and cross cutting knives should be used.
Third, the daily maintenance of the slitting machine should be in place. The criterion is that it is smooth, clean, and cleaned (no dust and debris) in place to ensure that the sliding parts of the equipment are in good condition.
Fourth, it is maintenance work. Regular and irregular inspections of rotating parts should be stopped (especially real-time monitoring of wearing parts). Implement regular adjustment, regular replacement, commutator and make detailed records in order to achieve the purpose of extending the service life of the equipment.
Fifth, improve the technical quality and level of the personnel who operate the slitting machine. The operation of the control part should be done by a special person, and no one should operate it without permission.
