From the overall point of view, in fact, the typical laminating and slitting machine equipment on the market belongs to a multi-functional three-in-one machine, which can be used alone as a slitting machine, rewinding machine, and laminating machine. The equipment is mainly used for bonding the adhesive material and the release material, and simultaneously slitting and winding around. Applicable to all kinds of materials, such as double-sided tape, release paper, Mara, stickers, cloth tape, polyester tape, etc. In actual production, the feeding part of this slitting machine equipment usually adopts one-piece unwinding method, and can also adopt independent unwinding method, or choose shaftless automatic feeding method according to needs, which is convenient for feeding. Fast. At the same time, it is equipped with an automatic edge-correcting device to make the fitting accurate, and at the same time enhance the slitting and winding effect.
For this laminating slitter machine, the winding part is usually a double-shaft center winding, and the upper and lower shafts are used for winding; the winding shaft is generally an air expansion shaft, and the slip shaft can also be selected according to special requirements. , The coiled product is more beautiful. The guide wheels of the fitting part are all statically balanced; the silicone wheel is used for the fitting wheel to effectively control the degumming and viscose phenomenon; the distance between the rollers and the tightness of the fitting are controlled by the cylinder and are automatically adjusted. In addition, the transmission system of the slitting machine equipment is driven by an AC motor, and at the same time is controlled by a vector frequency converter. The cutting part is divided by upper and lower round knives, the upper knife is fixed by a knife seat, and the lower knife is fixed by a precision knife pad or knife seat, and the cutting is accurate and stable. In addition, the laminating machine equipment is also equipped with related safety devices. For example, when the tailstock is opened, the device cannot start, thereby ensuring the safety of the operator. The tension of the slitting machine is controlled by the magnetic powder clutch and concentrated on the panel operation; after the substrate is bonded, the surface is smooth, smooth, no bubbles and no wrinkles.
https://www.ksslitter.com
