1. Preparation: Check whether all parts of the equipment are normal, such as unwinding shaft, rewinding shaft, deviation correction device, tension control system, etc. At the same time, prepare the materials to be rewound and ensure that the quality of the materials meets the requirements.
2. Loading: Place the large roll of material on the unwinding shaft to ensure that the material is in the correct position to avoid deviation during the rewinding process.
3. Set parameters: Set the parameters of the Rewinding Machine according to the characteristics of the material and production requirements, such as rewinding speed, tension size, deviation correction accuracy, etc. The setting of these parameters directly affects the quality and efficiency of rewinding.
4. Start the equipment: After confirming that all parameters are set correctly, start the Rewinding Machine. The equipment will automatically perform operations such as unwinding, tension control, deviation correction and rewinding.
5. Monitor operation: During the rewinding process, the operator needs to monitor the operating status of the equipment in real time to ensure that the material does not deviate, break, etc. during the rewinding process. If problems are found, the parameters need to be adjusted in time or the machine needs to be shut down for processing.
6. Rewinding: When the rewinding is completed, the equipment will automatically stop, and the operator needs to remove the rewound small roll from the rewinding shaft and conduct a quality inspection.
7. Cleaning and maintenance: After the rewinding is completed, the operator needs to clean and maintain the equipment to ensure the normal operation of the equipment and extend its service life.
