We know that the slitting machine is very accurate for paper slitting. Among them, there are still many reasons for the phenomenon of not working in the work. We still have to understand the common reasons. Let's say that the slitting machine does not work. What are the reasons for this?
1. The button switch is damaged.
The button switch is a fragile part of the slitting machine. It must be replaced when using restrictions.
2. The steering of the motor is wrong.
The direction of the engine is incorrect. There are usually many new machines and circuits replaced or rectified. The phase sequence of the power supply has changed. If the motor reverses, you can replace one of the two three-phase cables.
3. The relay has poor contact or burned out.
A relay is a component connected to a circuit. When the contact is poor or burned out, the circuit cannot be opened, causing the machine to fail to work. The relay was found to be black and replaced on time.
4. The slitter is blocked or damaged.
When the slitter is blocked or damaged, the hydraulic oil usually cannot be transported to the corresponding working position. Damage to the slitter is not easy to verify. Generally speaking, it is also based on the experience of using a small screwdriver to check whether the reel is smooth, whether there is resistance, and whether the quality of the slitter is damaged.





