During the rewinding operation of the slitting machine, if the paper slitting machine exhibits rewinding problems, the solutions for the rewinding faults of the slitting machine are as follows:
1. When the coiled product runs off the coil, whether the tension of the coiling shaft is too tight, or it is closely related to the glue during gluing;
2. The semi-finished product has wrinkles during winding, and the pressure of the tension cylinder can be appropriately increased;
3. When the center of the semi-product is loose, it is closely related to uneven gluing and uneven substrate. At this time, the bow roller should be adjusted to flatten it, or the tension of the unwinding shaft should be increased, and the substrate should be compacted with a knife tube.
The slitter is a pre-press and post-press equipment used to cut large rolls of paper, film, non-woven fabric, aluminum foil, mica tape and other thin materials into small rolls of different widths. The feature of the slitter is that the magnetic powder clutch is used as a resistance device to control the resistance generated by the magnetic powder clutch.
https://www.ksslitter.com
