1. The inlet and outlet sides should be neat.
2. Dissolve the dyeing materials separately, and add the materials evenly on both sides. To add dyes into the rewinder, pay attention to three points:
1. If you are not skilled, you must stop the feeding and do not add while walking.
2. The dyes and chemicals must be dissolved in advance for use.
3. When adding, it must be divided into two parts and added on two sides. After each side is added, it is necessary to use a bamboo, wood or stainless steel rod to make it evenly, and use an appropriate amount of water for the residue adhering to the side of the tank. Rinse into the tank, maintain clean production, and develop good operating habits.
3. Adjust the spreader according to the thickness of the fabric.
Fourth, the adjustment of the tension of the reel.
Five, in the dyeing process should pay attention to observe:
1. Whether the force sprayed from both sides of the directly heated steam pipe is consistent.
2. Whether each guide roller is active and balanced.
3. Whether the liquid carrying rate of the fabric is consistent.
4. Whether the cylinder body and the sealing ring have dripping phenomenon.
