The slitting machine has stretchability, the tension of the rewinding and unwinding is not well controlled, and the rewinding should be automatically applied with a relatively constant tension as far as possible. If the slitting machine has jumped edges, it may be that maintenance and maintenance work has not been carried out.
In order to ensure that the slitting machine is always in a good technical condition, it can be put into operation, reduce downtime, increase the mechanical integrity rate, utilization rate, reduce mechanical wear, increase mechanical service life, reduce mechanical operation and maintenance costs, and reduce production. Strengthen the maintenance of machinery and equipment.
The maintenance of the slitter must implement the principle of "equal attention to maintenance and prevention first", to achieve regular maintenance, mandatory, and correctly handle the relationship between use, maintenance and repair, and it is not allowed to use only without maintenance, only repair without maintenance.
The maintenance of the slitting machine must ensure the quality, and proceed item by item in accordance with the specified items and requirements, and shall not miss or fail the guarantee. Maintenance items, maintenance quality, and problems found during maintenance should be recorded and reported to the dedicated staff of this department.
Each team must complete the maintenance of different machinery in accordance with the mechanical maintenance regulations and maintenance categories, and shall not be delayed without reason. In other cases, the maintenance can be postponed only after the approval of the specialist in charge, but generally shall not exceed half of the prescribed maintenance interval. By doing the above points, the chance of cutting edge jumping will be much reduced.
