After the automatic slitting machine is unpacked, the integrity of the machine should be checked to see if there is any damage during transportation. After damage, the level can be adjusted on a flat and solid basis. The use of the slitting machine, when the power is turned on, then everyone knows how to use the automatic slitting machine correctly?
1. Check whether the static elimination mode has been turned on, this is to prevent the machine from malfunctioning and causing unnecessary losses during operation.
2. Turn on the air supply switch of the slitter and adjust it to between 0.5 and 0.6. Air pressure adjustment is critical as it affects the stability of the operation. After adjustment, use three to six cones to place the parent roll into the roll section.
3. After the mother roll is put into the roll section, it is necessary to debug the machine, compare the diameter of the mother roll, press the up or down button, adjust the unloading rack to a suitable height, and then clamp the roll film, so that it can rotate at a uniform or fast speed,
4. In order to make the paper can be placed in a relatively correct position, so that the cut paper will be very uniform. It is necessary to carry out a unified trial operation of the slitting machine, and there is no problem with the products produced during the trial operation.
5. Press the height adjustment button to confirm the safety. Next, to install the blade, first check the blade edge of the blade to see if there is any damage, and then select the appropriate cutting method according to the needs, and adjust the placement position of the blade. After this step is completed, the module of the paper core can be debugged.
