Slitting machine is a kind of mechanical equipment that cuts wide paper, mica tape or film into multiple narrow width materials. It is often used in papermaking machinery, wire and cable mica tapes and printing and packaging machines. During the rewinding operation of the slitting machine, if the paper slitting machine has a rewinding failure, the handling methods for the rewinding failure of the slitting machine are as follows:
1. When the coiled product is running, whether the tension of the coiling shaft is too tight, or it is closely related to the glue when gluing;
2. When the semi-finished product occurs during winding, the pressure of the tension cylinder can be appropriately increased;
3. When the center of the semi-finished product is loose, it is closely related to the uneven gluing and unevenness of the substrate. Use the knife tube to compact the substrate.
Slitting machine
The reasons why the rewinding of the slitting machine always deviates are as follows: the problem of equipment deviation; whether the pressure at both ends of the reel is consistent; the phenomenon of air leakage at the part of the reel. If the automatic slitting machine is not used for a long time, all bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine.
When the slitting machine has a rewinding failure, all of us can deal with the above fault problems. The correct way to operate and use the slitting machine rewinding failure is what we all need.
