1. The equipment stops suddenly:
Check the power supply: Make sure the power supply is normal, and check whether the power supply line is loose or damaged.
Check the emergency stop button: Check whether someone presses the emergency stop button by mistake. If so, reset the emergency stop button.
Check the overload protection: Check whether the overload protection device is triggered. If so, find out the cause of the overload and eliminate it.
2. Poor slitting quality:
Check the tool: Check whether the slitting tool is worn or damaged. If so, replace the tool.
Adjust the tension: Check whether the tension control system is normal and adjust the tension parameters.
Check the material: Check whether the material is flat. If there is a problem, replace the material.
3. Untidy winding:
Check the winding device: Check whether the tension and speed control of the winding device are normal, and adjust the relevant parameters.
Check the guide roller: Check whether the guide roller is working normally to ensure smooth material transmission.
