What are the safety operating procedures for the slitting machine?

1. Preparation before starting
Equipment inspection: The operator must be familiar with the basic structure, performance, usage and precautions of the equipment, and confirm whether all parts of the equipment are normal, including cutting tools, transmission systems, electrical systems, etc.
Safety equipment: The operator must wear appropriate safety equipment, such as safety helmets, safety glasses, non-slip shoes, etc., and avoid wearing loose clothing and jewelry.
Clean up the site: Make sure there are no obstacles around the equipment, keep the work area clean, and avoid stacking other items.
2. Operation process
Start-up operation: Turn on the power of the slitting machine according to the requirements of the equipment manual, and ensure that the electrical system is operating normally.
Adjust parameters: According to the characteristics of the cutting material, adjust the cutting parameters of the slitting machine, including cutting speed, cutting pressure, etc.
Loading and film penetration: According to the requirements of the slitting plan and the driving operation procedures, lift the corresponding mother roll and place it on the slitting machine unwinding rack. When there is no film on the slitting machine, the film penetration operation must be performed.
Operation monitoring: During the slitting operation, carefully monitor and observe the slitting effect, and properly adjust and control the slitting speed, unwinding tension, contact pressure, arc roller, edge material traction roller, guide edge, etc.
3. Safety precautions
No touching: When the slitting machine is running, do not touch the running film roll or roller core with your hands to avoid getting your hands involved and causing personal injury.
No scratching: During operation, do not scratch or cut the roller core with a knife or hard objects.
Stop inspection: Before replacing or adjusting the slitting blade, checking machine failure, etc., you should stop the machine first and unplug the power supply to ensure your own safety.
Emergency stop: When an emergency such as equipment or man-made accidents occurs, press EMERGENCY STOP for emergency stop.
4. After stopping
Cut off the power supply: After the machine is stopped, the power supply should be cut off, and the residue inside the machine and the dust outside the machine should be cleaned.
Regular maintenance: The slitting machine should be regularly inspected and maintained to ensure the normal operation of the machine.