1. Preparation before operation
Read the operating manual: Before operating the slitting machine, be sure to carefully read and understand the operating instructions and safety guidelines of the equipment.
Wear appropriate protective equipment: Operators should wear safety helmets, protective glasses, earplugs (if the noise is loud), gloves and work clothes.
Check the status of the equipment: Make sure the equipment is in good working condition and check whether key components are normal, such as blades, rollers, motors, etc.
Clean up the work area: Make sure the work area is tidy, free of debris and obstacles to avoid slips or trips.
2. Precautions during operation
Comply with the operating procedures: Operate in strict accordance with the operating procedures of the equipment to avoid illegal operations.
Avoid contact with moving parts: Avoid contact with any moving parts such as blades, rollers, etc. when the equipment is running.
Use safety devices: Make sure that the safety devices of the equipment (such as emergency stop buttons, protective covers, etc.) are enabled.
Avoid overload operation: Do not exceed the rated working capacity of the equipment and avoid long-term high-load operation.
Monitor equipment status: During operation, pay close attention to the operating status of the equipment, such as temperature, sound, etc., and immediately stop and check if any abnormality is found.
3. Emergency handling
Be familiar with the emergency stop procedure: Make sure the operator is familiar with the location and use of the emergency stop button.
Keep calm: In an emergency, stay calm and take prompt measures.
Cut off the power: In an emergency, immediately cut off the power supply of the equipment.
Notify professionals: After handling the emergency, promptly notify professionals for inspection and repair.
4. Precautions after operation
Shut down the equipment: After completing the operation, turn off the equipment and cut off the power.
Clean the equipment: Clean the surface and inside of the equipment to remove dust, debris and other debris.
Check the equipment status: Check the key components of the equipment again to ensure that the equipment is in good working condition.
Record the operation: Record the operation of the equipment and any abnormal conditions to facilitate subsequent maintenance and inspection.
5. Regular maintenance and inspection
Maintain equipment regularly: Perform equipment maintenance and inspection regularly according to the equipment manufacturer's recommendations.
Check safety devices: Regularly check whether the safety devices of the equipment are working properly, such as emergency stop buttons, protective covers, etc.
Train operators: Provide safety training to operators regularly to ensure they are familiar with the equipment's operating procedures and safety precautions.
