Knife slitting and suspended slitting. Knife slitting uses a straight knife in conjunction with a sipe roller. The film passes through the sipe roller surface, and the straight knife falls into the groove of the sipe roller. As the film runs longitudinally on the sipe roller, A straight knife dropped into the slot cuts the film lengthwise.
Since the film has a certain wrapping angle on the surface of the sipe roller, the surface of the sipe roller supports the film material during slitting, so that the cut film material has a certain stiffness and is not prone to lateral displacement.
Therefore, the quality of the cut products is relatively good. Since the surface of the groove roller is composed of convex and concave grooves, the straight knife will also fall into the protruding part of the groove, so the width of the slit material must be considered to match the groove position.
Suspended slitting and knife groove slitting are in a complementary state. The suspended straight knife can perform slitting at any position. The film material is in a suspended state during slitting, and the material is in a relatively unstable state, so the slitting accuracy is compromised. It will be slightly worse.
May 10, 2024
Leave a message
What are the slitting methods of the slitting machine?
Send Inquiry





