What is the operating procedure of the automatic slitting machine?

1. Preparation before starting the machine
Check whether the appearance of the equipment is intact, whether the connections of various parts are firm, and whether there are loose or damaged parts.
Check whether the electrical system is normal, including power supply, control box, motor, etc., to ensure that there are no faults such as leakage and short circuit.
Check whether the hydraulic system (if any) is normal, whether the oil level is within the specified range, and whether there is any leakage.
Check whether the tool is sharp, whether it is firmly installed, and adjust the tool gap to the appropriate position.
Prepare the material to be slit and ensure that the material specifications meet the equipment requirements.
2. Start-up operation
Turn on the power switch, start the equipment control system, and wait for the equipment self-test to complete.
Set the slitting width, length, speed and other parameters according to the specifications and requirements of the slitting material.
Place the material to be slit on the unwinding rack, adjust the tension, and ensure that the material is flat and wrinkle-free.
Start the unwinding motor, introduce the material into the slitting machine, and after the tool is slit, the rewinding motor is rewound.
3. Operation during operation
Closely observe the operating status of the equipment and listen to whether the equipment has abnormal noise, vibration, etc.
Check the quality of the material after slitting, such as whether the width is uniform, whether the cut is neat, etc. If there is a problem, adjust the equipment parameters in time.
Keep the environment around the equipment clean and tidy to prevent debris from entering the equipment.
Check the tension system of the equipment regularly to ensure that the tension of the material is stable during the slitting process.
If the equipment fails, it should be shut down immediately and the maintenance personnel should be notified for maintenance.
4. Shutdown operation
When the slitting task is completed, stop the unwinding motor first, and then stop the rewinding motor after the material is completely slid.
Turn off the power switch of the equipment and cut off the power.
Clean up the debris and dust on the surface and inside of the equipment to keep the equipment clean.
Perform daily maintenance on the equipment, such as checking the wear of the tool and lubricating the equipment parts.
5. Safety precautions
The operator must undergo professional training and be familiar with the operation methods and safety precautions of the equipment.
During operation, it is strictly forbidden to put your hands into the equipment to avoid danger.
When the equipment is running, it is not allowed to adjust the equipment parameters or perform maintenance work at will.
Perform safety inspections on the equipment regularly to ensure that the safety protection devices of the equipment are intact and effective.
If an emergency occurs, press the emergency stop button immediately and take appropriate emergency measures.
The above is the operating procedures of the automatic slitting machine. If you need an automatic slitting machine, please contact Kesheng machinery. Our technical team will tailor the most suitable automatic slitting machine solution for you. We will also continue to optimize and provide you with higher quality products and services. We look forward to cooperating with you.