We know that the operation of Bottle Label Slitting Machine is of great help to the production of many paper or textile products. We need to understand its operation steps to achieve better results in use. Let's talk about cutting What steps do you need to understand during operation?
1. Before trial operation, all moving parts must be carried out no-load action (forward and reverse), and the operation of each part must be checked.
2. Start the main motor for no-load trial operation of the leveling host, and run it in the forward and reverse directions for 1 to 2 hours, check the connection and operation of each component, and check the braking effect of the leveling host's brake.
3. The load test operation can be carried out after the dry running is considered to be good, and the condition of the various parts of the machine should also be checked. If an abnormal phenomenon is found, the machine should be stopped immediately, inspected or adjusted, and the abnormal phenomenon is eliminated, and then try the operation again. The machine should run smoothly without noticeable Vibration and noise.
4. After the trial operation is qualified, the machine can be put into production. After the machine is put into production, the load of the machine must not exceed 80% of the rated load before the parts of the machine are completely run-in.





