Due to different transmission control methods, the cross-cutting machine is divided into mechanical cross-cutting machine and computer-controlled cross-cutting machine. The computer cross-cutting machine is controlled by an industrial control computer. According to the set length, the knife shaft is controlled to cut the cardboard. In addition, the precision transmission of the mechanical part can control the cutting error within ±1mm. Computer-controlled cross-cutting machines include spiral knife cross-cutting machine and straight knife cross-cutting machine. The spiral knife cross-cutting machine is suitable for high-speed cutting of thick cardboard, and the cutting is stable, and the blade has a long time. Increase the technical quality and level of the operators, and must be responsible for the operation of the control part, and do not operate without permission.
Before starting the embossing, check the tightness of the power switch, the tightness of the grinding wheel, the protective cover or the safety baffle in detail. The operating table must be stable, and there should be corresponding lighting for night operations. Startup is allowed after safety is confirmed. After the machine is running normally, the material will be cut off. When the cross-cutting machine breaks the material, the end close to the cutting machine must be clamped with a clamp, and then hold the cutting machine's power handle slowly and apply downward force. Force, so as not to damage the cutting wheel and the grinding wheel to fly out and hurt people. After the embossing work is completed, turn off the power, lock the door, and take measures to prevent rain when working in the open air.
https://www.ksslitter.com
