1. Regular Maintenance and Inspection
Daily Inspection: Clean the machine surface, check the oil level, tighten screws, and ensure that transmission components are properly lubricated.
Weekly Inspection: Test the emergency brake function and verify that safety devices (such as protective covers and emergency stop buttons) are effective.
Monthly Calibration: Adjust the tool gap and tension system to ensure slitting accuracy (e.g., width error ≤ ±0.1mm).
2. Key Component Maintenance
Tool Management: Regularly check blade wear. Tungsten carbide blades should be replaced every 50km of cutting, and ceramic blades should be stored to prevent collisions.
Tension Control: Use a PID algorithm to maintain tension fluctuations ≤ ±0.5N to prevent material stretching or wrinkling.
Lubrication System: Lubricate transmission components such as the lead screw and gears daily to prevent sticking.
3. Operating Instructions and Training
Safe Operation: Operators must wear protective equipment (such as gloves and goggles) and avoid contact with hazardous areas during operation. Parameter Setting: Adjust slitting speed and tool clearance based on material properties (such as thickness and hardness) to avoid overload and wear.
Fault Logging: Create an equipment operation log to record abnormalities and repair history, facilitating root cause tracing.
4. Environmental and External Force Control
Environmental Cleanliness: Keep the work area free of debris to prevent dust and foreign matter from entering the equipment.
Vibration Mitigation: Ensure a stable foundation and, if necessary, install vibration damping devices to minimize the impact of vibration on accuracy.
5. Intelligent Monitoring and Early Warning
Vibration Analysis: Monitor tool vibration using accelerometers and automatically generate alarms when anomalies occur (such as sudden changes in vibration frequency).
Data Feedback: Leverage the IIoT system to analyze slitting parameters in real time and provide early warning of potential failures.
6. Emergency Response
Quick Response: Immediately shut down the machine upon detecting anomalies (such as material deviation or noise) and troubleshoot the power supply and transmission components according to the manual.
Professional Maintenance: Complex faults (such as servo system alarms) require contacting the manufacturer or professional technicians.






