I. Finished Product Dimensional Stability Inspection
1. Set a uniform standard size and continuously cut 5-10 sample segments. Sample the first, last, and middle segments.
2. Measure the finished product dimensions multiple times using a high-precision vernier caliper. If any segment deviates beyond the nominal tolerance, it is considered an accuracy anomaly.
3. Tolerance requirements: Ordinary packaging aluminum foil ≤ ±0.1mm, high-precision electronic aluminum foil ≤ ±0.02mm.
II. Cutting Shape Accuracy Inspection
1. Straightness Inspection: Use a thin string to compare the cut edge. Visually inspect or use tools to measure the cut edge tilt deviation. A deviation exceeding 0.1mm is considered unacceptable.
2. Perpendicularity Inspection: Use a right-angle ruler close to the cut edge to measure the gap. A gap exceeding the tolerance is considered unacceptable, indicating a positional accuracy deviation.
III. Equipment Component Accuracy Inspection
1. Spindle Runout Inspection: Use a dial indicator to measure the spindle runout. A deviation exceeding 0.01mm requires repair and calibration.
2. Tension Stability Test: After startup, observe the stability of the tension testing roller's speed. If the outer diameter deviation exceeds 5g, it indicates insufficient machining accuracy and requires recalibration.
3. Continuous Operation Stability Test: Repeat the above test after 3 hours of continuous operation. If the accuracy drift exceeds the tolerance, the accuracy is unstable.






