How to use the automatic slitting machine?

Preparation before use
1. Equipment inspection
Check the various components of the automatic slitting machine, including the unwinding mechanism, slitting knife, rewinding mechanism, transmission parts, etc., to ensure that there is no obvious damage or looseness.
Check the connection of the electrical system to ensure that the power cord, control line, etc. are well connected.
2. Material preparation
Prepare the coiled material to be slitting according to the slitting requirements. Check the quality of the material, such as whether there is damage, wrinkles, etc.
Make sure that the specifications of the material (such as width, thickness, material, etc.) are consistent with the applicable scope of the slitting machine.
Equipment commissioning
1. Install materials
Install the prepared coiled material on the unwinding mechanism, fix the reel, and adjust the position of the coiled material so that the material can enter the slitting area smoothly.
2. Tool adjustment
Adjust the spacing and position of the slitting knife according to the slitting size requirements. For different materials and slitting accuracy requirements, you may need to select different types of knives (such as round knives, flat knives, etc.) and make precise adjustments.
3. Tension adjustment
Adjust the tension control system of the unwinding and rewinding mechanisms. Appropriate tension can ensure smooth material delivery during the slitting process and avoid material stretching or wrinkling. Generally speaking, you can first set an initial tension value based on experience, and then fine-tune it according to the actual situation during the trial cutting process.
4. Parameter setting
Set the relevant parameters of slitting on the control panel, such as slitting speed, slitting length, quantity, etc. The setting of these parameters should be considered comprehensively based on factors such as material characteristics, slitting accuracy requirements, and production efficiency.
Formal operation
1. Start the equipment
After completing the above debugging steps, start the automatic slitting machine. During the operation of the equipment, closely observe the slitting of the material, including the slitting accuracy, whether the material is smoothly conveyed, and the working status of the tool.
2. Real-time monitoring
Pay attention to the operating status of the equipment, such as the current, voltage, temperature of the motor, and other parameters to ensure that the equipment operates within the normal working range.
Check the winding situation to ensure that the slitting material can be neatly and tightly wound on the reel.
Post-use processing
1. Shutdown operation
When the slitting work is completed or the equipment needs to be suspended, perform the shutdown operation in accordance with the operating procedures. Generally, stop the material delivery first, then turn off the power system of the slitting machine, and finally turn off the main electrical switch.
2. Equipment cleaning and maintenance
After the slitting work is completed, clean up the residual materials, dust and other debris on the equipment in time.
Check and clean the tool. If the tool is severely worn, it needs to be replaced in time.
Perform regular maintenance on the equipment, such as checking the lubrication of the transmission parts and the stability of the electrical system.
If you want to know how to use the automatic slitting machine, welcome to follow www.ksslitter.com!