Oct 30, 2024 Leave a message

What are the precautions when using the automatic slitting machine?

Before operating the equipment
1. Personnel training
Make sure that the operator has received professional training and is familiar with the operating procedures of the automatic slitting machine, the functions of the control panel, and the meaning of various parameters. Only qualified personnel can operate the equipment.
2. Equipment inspection
Check whether the protective devices of the equipment are complete and intact, such as tool guards, protective nets at the transmission parts, etc. These protective devices are important barriers to prevent operators from contacting dangerous parts.
Check whether the electrical system is normal, including whether the power cord is damaged and whether the grounding is good, to prevent electrical accidents.
During equipment operation
1. Wear protective equipment
Operators must wear appropriate protective equipment, such as safety helmets, safety shoes, gloves, goggles, etc. Goggles can protect the eyes from splashes that may be generated during the slitting process; gloves can prevent hands from being scratched by materials or equipment parts.
2. Avoid contact with dangerous areas
During the operation of the equipment, it is strictly forbidden to put hands or other parts of the body into dangerous areas such as the tool area and transmission parts. Even if the equipment fails, it must be shut down before inspection and maintenance.
3. Pay attention to the material status
Pay attention to the material conveying situation to prevent the material from deviation, winding and other abnormal situations during the conveying process. If the material is abnormal, the machine should be stopped in time to avoid equipment failure or safety accidents.
4. Emergency handling
Be familiar with the location and operation method of the emergency stop button of the equipment. In the event of an emergency, such as equipment failure, personal injury, etc., the emergency stop button can be quickly pressed to stop the equipment from running.
When maintaining and servicing the equipment
1. Shutdown operation
Before performing equipment maintenance and servicing, the equipment must be shut down and the power supply of the equipment must be cut off to prevent personal injury caused by sudden start of the equipment during maintenance.
2. Tool use specifications
Use appropriate tools for equipment maintenance and servicing to avoid using non-standard tools to cause equipment damage or safety accidents.
When replacing wearing parts such as knives, follow the operating procedures to ensure that the knives are firmly installed.
If you want to know the precautions for using the automatic slitting machine, you can consult our professional technicians, and we will provide you with the best service!

Send Inquiry

whatsapp

Phone

E-mail

Inquiry