1. Inspection before starting
Check the equipment status: Make sure that all parts of the equipment are operating normally, including whether the computer host, display screen, and measuring table power plug are well connected.
Clean up the work area: Remove debris on the workbench to ensure that the operation area is clean and tidy.
Check safety devices: Make sure that all safety devices (such as protective covers, guardrails, etc.) are firmly installed and working properly.
2. Safety operating procedures
Wear protective equipment: Operators should wear safety helmets, goggles, gloves and protective shoes.
Avoid contact with moving parts: It is strictly forbidden to contact any moving parts when the equipment is running.
It is forbidden to place irrelevant items: Tools or other items cannot be placed on the movement travel of movable parts such as workbenches.
Follow the operating procedures: Operate in strict accordance with the operating procedures of the equipment to avoid illegal operations.
Monitor the equipment status: During operation, pay close attention to the operating status of the equipment, such as temperature, sound, etc., and stop the machine for inspection immediately if abnormalities are found.
3. Emergency handling
Emergency stop: In an emergency, immediately press the emergency stop button to cut off the power supply.
Notify professionals: After handling the emergency, promptly notify professionals to conduct inspection and repair.
4. Equipment maintenance and care
Regular maintenance: Perform a comprehensive inspection of the equipment, including mechanical parts and electrical control systems, according to the prescribed maintenance cycle.
Clean equipment: Keep the equipment clean and regularly clean up oil and dust.
Lubrication maintenance: Regularly lubricate moving parts to ensure flexible operation of the equipment.
5. Other precautions
Avoid changing parameters at will: It is not allowed to change the set working parameters of the inspection machine at will.
Avoid high temperature operation: When using certain inspection machines (such as impact testers), ensure that the operating temperature of the equipment does not exceed the safe range.
Ensure material quality: Before testing, ensure that the material is smooth and flat, without iron filings or barbs.
