What are the main reasons why Aluminum Foil Slitting Rewinding Machine often crushes the die?
1. Problem: Excessive scum and dust accumulation are set under the guide block, so that the travel switch cannot touch when the guide block is pressed down, thereby squeezing the mold.
Solution: Clean up the debris.
Preventive measures: regularly clean up the debris next to the rewinder.
2. Problem: The trip switch fails to transmit signals.
Solution: Replace the limit switch of the rewinder.
3. Problem: Oil leakage failure of the rewinder.
Solution: Please contact relevant personnel for maintenance. Do not disassemble and inspect by yourself.
