After the slitter rewinder machine control system is improved, the marking operation is simple, and the photoelectric sensor will automatically position the color marking without manual movement. Color code counting can also be used for single-layer products. Lighting power saving function.
1. A counter can be used to align the color mark once. The exhaust fan is turned on automatically and synchronously. The program adopts fuzzy logic calculation and benchmarking technology, which can guarantee a compliance rate of 99%.
2. Intelligent retracting cylinder: The cylinder will open according to the retracting distance, which can ensure the stability of the unwinding tension when starting, and prevent the paper biting phenomenon caused by tension jitter when starting.
3. The benchmarking will not be limited by the speed, and accurate benchmarking at full speed can be achieved. The current situation that the speed of the original equipment cannot be greater than 25 meters during the production of the benchmarking product is changed, and the production capacity is increased.
Crosscutting machine standard operation manual:
1. Set the shutdown and deceleration parameters, and start the equipment. Use the printing counter P1 function to set the return distance. When setting, the actual distance value should be ×2. Use a ruler to measure the error distance of the upper and lower color scales after stopping.
2. Press the mark button again, the device will automatically unmark according to the memory data. After the unmarking action is over, move the lower photoelectric switch to the middle position of the color mark, and adjust the sensitivity of the photoelectric switch to complete.
3. Press the setting to build, the color mark will be automatically aligned according to the set value. Move the benchmarking switch to the right and start the device to complete a roll. If there is an error, just move the photoelectric switch accordingly.
