1. It is forbidden to touch the moving parts
It is strictly forbidden to touch: During the operation of the Rewinding machine, it is strictly forbidden to touch any moving parts, such as blades, rollers, transmission belts, etc., to avoid accidental injuries.
Keep a safe distance: The operator should keep a safe distance and avoid any part of the body close to the moving parts.
2. It is forbidden to operate in violation of regulations
It is strictly forbidden to operate overload: The rated working capacity of the equipment must not be exceeded, and long-term high-load operation should be avoided to avoid damage to the equipment.
It is strictly forbidden to operate simultaneously: It is forbidden to operate two materials of different specifications on the Rewinding machine at the same time.
It is strictly forbidden to wear gloves: During the rewinding operation, it is strictly forbidden to wear gloves to avoid gloves being rolled into the equipment and causing danger.
It is strictly forbidden to adjust without authorization: Personnel who have not been professionally trained shall not adjust the tension, speed and other parameters of the equipment without authorization.
3. It is forbidden to perform maintenance during the operation of the equipment
It is strictly forbidden to maintain during operation: When the equipment is running, it is strictly forbidden to wipe, refuel, adjust or repair the rotating parts to avoid accidents.
It is forbidden to handle faults during operation: If the equipment fails, it must be shut down and the power supply must be cut off before handling.
4. It is forbidden to use damaged equipment
It is forbidden to use damaged equipment: If the blades, rollers, motors and other key components of the equipment are found to be damaged, the equipment should be shut down for inspection immediately and must not be used.
It is forbidden to use materials that do not meet the requirements: Make sure that the materials used meet the equipment requirements to avoid equipment damage or safety accidents caused by material problems.
5. It is forbidden to leave the operating table during equipment operation
It is forbidden to leave the operating table: During the operation of the equipment, the operator must always be near the operating table and must not leave at will so that the equipment can be shut down immediately in an emergency.
It is forbidden to operate unmanned: When the equipment is running, there must be a dedicated person responsible for the operation and it must not be left unattended.
6. It is forbidden to clean the equipment during operation
It is forbidden to clean during operation: When the equipment is running, it is forbidden to clean or wipe the equipment to avoid accidents.
It is forbidden to clean the edge of the paper during operation: If the edge of the paper is wrapped around the roller, it must be shut down before cleaning.
7. It is forbidden to make adjustments during equipment operation
It is forbidden to adjust the tension during operation: During the operation of the equipment, the tension, speed and other parameters shall not be adjusted at will to avoid affecting the normal operation of the equipment.
It is forbidden to replace parts during operation: If parts need to be replaced, the machine must be shut down and the power supply must be cut off first.
8. It is forbidden to hoist during equipment operation
It is forbidden to hoist during operation: During the operation of the equipment, it is forbidden to carry out hoisting operations to avoid affecting the stability of the equipment and the safety of the operator.
9. It is forbidden to perform joint operations during equipment operation
It is forbidden to perform joint operations during operation: During the operation of the equipment, joint operations shall not be carried out to avoid affecting the normal operation of the equipment and the safety of the operator.
10. It is forbidden to debug during equipment operation
It is forbidden to debug during operation: During the operation of the equipment, debugging operations shall not be carried out to avoid affecting the normal operation of the equipment and the safety of the operator.
11. It is forbidden to clean and lubricate during equipment operation
It is forbidden to clean and lubricate during operation: During the operation of the equipment, cleaning and lubrication operations shall not be carried out to avoid accidents.
12. Inspection during equipment operation is prohibited
It is strictly prohibited to inspect during operation: During the operation of the equipment, inspection operations shall not be performed to avoid affecting the normal operation of the equipment and the safety of the operator.
13. Adjustment during equipment operation is prohibited
It is strictly prohibited to adjust during operation: During the operation of the equipment, adjustment operations shall not be performed to avoid affecting the normal operation of the equipment and the safety of the operator.
14. Cleaning during equipment operation is prohibited
It is strictly prohibited to clean during operation: During the operation of the equipment, cleaning operations shall not be performed to avoid affecting the normal operation of the equipment and the safety of the operator.
15. Lubrication during equipment operation is prohibited
It is strictly prohibited to lubricate during operation: During the operation of the equipment, lubrication operations shall not be performed to avoid affecting the normal operation of the equipment and the safety of the operator.
