Optical Inspection Machine for Plastic Films
Description:
Often when extruding plastic for use in packaging for food, carbon specks and contamination are not allowed. Our adaptive surface inspection package is designed specifically for this application. The software will detect the following:
Gels
Holes
Carbon
Contamination
Wrinkles etc.
The system on the right is a single camera system installed on a blown film line. Deployed in one day, it is very easy for the operators to use. The challenge for this application is that the inspection system is placed after a rotary perforator. The system must not only inspect for defects, but check that the perforations are made and in place, while still looking for holes that should not be there.
Parameter
| Unwinding diameter | Max Ø800mm |
| Rewind diameter | Max Ø800mm |
| Max working width | 1300mm |
| Unwind core diameter | Ø76mm (3") |
| Rewind core diameter | Ø76mm (3") |
| Mechanical speed | Max 300m/min (depending on working conditions) |
| Material thickness range | 0.012mm-0.15mm |
| Traction motor | 1 Set 3 kw |
| Rewindingmotor | 1 Set 5 kw |
| Unwinding motor | 1 Set 5 kw |
| Total energy consumption | ≈15 kw |
| Pneumatic pressure | 0.6 Mpa |
| Power supply voltage | AC 380V±5% Three-phase five-wire、50Hz |
| Guiding accuracy | ±0.3mm |
| Web guiding Movement range | ±100mm |
| Machine dimension | L3000*W2300*H2300 |
| Weight | 4120 kg |
Hot Tags: optical inspection machine for plastic films, China optical inspection machine for plastic films manufacturers, suppliers, factory
You Might Also Like
Send Inquiry