Knowledge

During the use of the paper slitter, some users found that the paper slitter suddenly did not work. After restarting the machine, there was still no improvement. Although the proba

First, the material of the knife. The single-chip cutting machine tool is made of high-temperature processing of the cutter body and the cutter body. The cutter body is made of cr

1. The mechanical pressure spring is not elastic enough. At this time, the pressure must be increased. If it is not enough to increase to the maximum position, the spring needs to

1. The automatic toilet paper rewinding machine can choose double-sided embossing and gluing compound, which can make the paper softer than single-sided embossing, and the double-s

Common troubleshooting methods for automatic slitting machine equipment: 1. The winding of the automatic slitting machine is uneven, mainly because the paper core is not suitable.

1 Preparation before starting up 1. 1 Check whether the main motor and paper feeding belt are normal. 1. 2 Check whether the pneumatic instrument display is in normal working condi

Paper slitting machine is a kind of paper processing equipment, which is mainly used for the processing of sheet paper in paper mills and the forming and processing of printed matt

The safety of the paper cutter is a problem that many digital printing practitioners tend to ignore. The following aspects affect the safe use of the paper cutter: 1. Braking devic

1. The automatic rewinding machine can choose double-sided embossing and gluing compound. Compared with single-sided embossing, it can make the paper softer. The double-sided effec

1. Automatic edge trimming, glue spraying, sealing, and shaft pulling are completed synchronously in an instant, so that there is no paper loss when the roll paper is transferred t

1. Does the toilet paper rewinder have PLC (programmable logic controller) programming: the one with PLC is called a fully automatic rewinder, and the one without PLC programming i

Before use, the main components of the automatic slitting machine should be inspected and lubricated; when inspecting and disassembling the automatic slitting machine, it is strict